20. März 2010

Fuchsschwanz nach J. Flint - Flintstyle panel saw

Der kleine Fuchsschwanz entwickelt sich: Klaus hat mir den Grif geschickt, damit ich die Zähne testen kann.


Subtitles:

Klaus send me the handle. Now I can finish the saw sharpening.

6 Kommentare:

  1. Guten Tag,

    Are you taper-grinding your saw so that the back is thinner than the teeth?

    Jay

    AntwortenLöschen
  2. Hi Jay,

    this saw was'nt taper grinded. Maybe future saws will be.


    best wishes
    Pedder

    AntwortenLöschen
  3. Bitte, Wie wuerden Sie das tuhen? Es muess sehr schwerig sind. Eines neues Disston 77-styl wuerde sehr kuhl sein. Ich wundere mich, kann ich ein neues Acme 120, D-12, oder 77 machen? Nur eine frage.

    Entschuldigen sie mein schreckliches Deutsch.

    Jay

    AntwortenLöschen
  4. Hi Jay,

    Your German is wonderful, no need to regret!

    We are trying to grind the blades with a big belt sander.

    To make a sawplat without setting the teeth needs a high grade of perfection in taper grinding. For that we would need machines we actually don't have.

    Cheers Pedder

    AntwortenLöschen
  5. Interessant. Ist der "belt sander" schnell oder langsam? Macht es die Saege "curl"?

    I'll switch to English now because I can't express it in German.

    I was thinking of using grinding wheels stacked side-by-side, and putting the saw plate on a sliding sled. It could have spring-loaded depth stops canted at just the right angle so that it would stop grinding when you reached the right depth of cut, (or alternatively, the correct saw plate thickness). It would be easy to determine the correct setting with a dial indicator, then you could just grind away until it's time to flip the saw plate over, make your adjustments, and grind the other side.

    Jay

    AntwortenLöschen
  6. Hi Jay,

    Sorry for being a little late.

    It’s a long belt sander wich runs not extrem fast. But Klaus has to be very carefully not to overheat the blade. Your ideas are very interesting. Alas, we don’t make enough saws to buy or build new machines, so we have to use the machines from the inventory.

    Cheers Pedder

    AntwortenLöschen